FD80F series intelligent sanitary pressure transmitter is specially designed for sanitary applications .It adopts high performance pressure sensor,matched with a high - precision intelligent amplifying circuit,accurate digital correction;full welding structure,meet the standard of 3 - A sanitary grade.
| Model | FD80F Sanitary Pressure Transmitter |
| Pressure Range | 0-0.04Bar...0.2Bar...0.7Bar....30Bar(optional) |
| Pressure Type | Gauge pressure; Absolute pressure; Negative pressure |
| Pressure Sensor | Diffused Silicon Pressure Sensor |
| Diaphragm | 316L Stainless Steel |
| Output Signal | Two Wire 4~20mA |
| Power Supply | 24VDC 10~30VDC |
| Accuracy | ≤ 0.25%,0.5% |
| Working Temperature | -20ºC ~100ºC ,-20ºC~150ºC Optional |
| Compensated Temperature | -20ºC ~85ºC |
| Storage Temperature | -20ºC ~85ºC |
| Overload pressure | 150% FS |
| Burst Pressure | 200% FS |
| Long Stability | Standard: 0.2%/year |
| Zero Temp. Drift | 0.003%FS/ºC(≤100kPa), 0.002%FS/ºC(>100kPa) |
| Insulation Resistance | >100M Ω @50V |
| Electrical Connection | Direct lead,Hirschmann or Customization |
| Process Connection | 1.5 Inch Clamp(φ50.5mm),2 Inch Clamp(φ63.5mm) etc. |
| Display | With display or not (optional) |
| Housing Material | 316 Stainless Steel or 1Cr18Ni9Ti |
| Process Material | 316 Stainless Steel or 1Cr18Ni9Ti |
| Response Time | ≤10ms |
| Protection Level | IP65,IP67 |
| Cable length | Cable Length Customization |
| Remarks | Special applications request by Customization |
