Brief Introduction
Glass fiber material hydraulic filter cartridges replace hilco hilliard PH426-01-CG1V liquid fuel oil filter for oil filtering
The Hilco PH series of filter cartridges Replacement Hydraulic Filter Hilco PH426-01-CG1V achieves the demand for higher efficiency without sacrificing dirt capacity and low pressure drop by incorporating modern synthetic filter fibers with much smallerdiameters than traditional cellulose fibers. Smaller fibers take up less space in the filter matrix, leaving more room for dirt capacity. Smaller fibers also represent less resistance to fluid flow, maintaining lower pressure drops with closer fiber spacing and the resultant smaller pore sizes.
Product Features
Technical Parameter --- Interchange Hilco hydraulic return line filter element filter PH426-01-CG1V
Applications of Replacement Hydraulic Filter Hilco PH426-01-CG1V
• Engine and Turbine Lube; • Compressor Lube and Seal Oil
• Fuel Oil; • Flushing
• High-Speed Coupling Oil; • EHC Fluid
• Oil with Water; • Process Water
• Cooling Water; • EDM Coolant
• Chemicals
Features of Replacement Hydraulic Filter Hilco PH426-01-CG1V
• Microglass filter media is sandwiched between two protective layers of nylon media then
supported with an epoxy-coated steel screen.
• Support screens provide a rigid pleat structure to withstand high cyclic and pulse flow
fatigue.
• Synthetic media enables the cartridge to be used in a wide range of applications, including those which could deteriorate a standard cellulose paper cartridge (i.e., water exposure).
Related Products models
* Last but not least, above are not the whole models we produce replacements for Hilco filter elements. We make PH series, PS series, etc.
More HIlico models for your references
Vulcanization workshop & Mold tooling
Warehouse & Package
Customers' Visiting
FAQ
Q 1.Which Payment way is workable?
A: Irrevocable L/C, Cash, PayPal, Credit card and T/T money transfers.
B: 30% T/T deposit in advance, 70% balance before shipment after presentation of ready cargo.
C: L/C ( Irrevocable LC at sight: Order amount over USD10,000)
Q 2. What is the normal lead time for product orders?
A: Average lead times for prototype / first article are 1-2 weeks, if tooling is involved, lead time for production tooling is 10 days, average production time after sample approval is 2-3 weeks.
Q 3. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
A2: We have various rubber compounds approved by UL, FDA,, KTW, W270, WRAS, ACS, AS4020, EN681, EN549, ROHS and REACH.
Q 4: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs while keeping material costs in mind.
Q 5: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q 6:Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in case of an order.
Glass fiber material hydraulic filter cartridges replace hilco hilliard PH426-01-CG1V liquid fuel oil filter for oil filtering
The Hilco PH series of filter cartridges Replacement Hydraulic Filter Hilco PH426-01-CG1V achieves the demand for higher efficiency without sacrificing dirt capacity and low pressure drop by incorporating modern synthetic filter fibers with much smallerdiameters than traditional cellulose fibers. Smaller fibers take up less space in the filter matrix, leaving more room for dirt capacity. Smaller fibers also represent less resistance to fluid flow, maintaining lower pressure drops with closer fiber spacing and the resultant smaller pore sizes.
Product Features
Technical Parameter --- Interchange Hilco hydraulic return line filter element filter PH426-01-CG1V
Model Number | PH426-01-CG1V |
Type | Hydraulic oil filter element |
Dimension | lengh : 660 mm |
Working temperature | -10 ~ +100ºC |
Work pressure different | 21bar ~ 210bar |
Material | Glass fiber |
Filter precision | 1-100μm |
Life span | 2000- 4000h |
Applications of Replacement Hydraulic Filter Hilco PH426-01-CG1V
• Engine and Turbine Lube; • Compressor Lube and Seal Oil
• Fuel Oil; • Flushing
• High-Speed Coupling Oil; • EHC Fluid
• Oil with Water; • Process Water
• Cooling Water; • EDM Coolant
• Chemicals
Features of Replacement Hydraulic Filter Hilco PH426-01-CG1V
• Microglass filter media is sandwiched between two protective layers of nylon media then
supported with an epoxy-coated steel screen.
• Support screens provide a rigid pleat structure to withstand high cyclic and pulse flow
fatigue.
• Synthetic media enables the cartridge to be used in a wide range of applications, including those which could deteriorate a standard cellulose paper cartridge (i.e., water exposure).
Related Products models
Related Model Numbers | Related Model Numbers | Overall Length |
PH718-12-CN | PH718-10-CN | 18' |
PH718-11-CN | PH718-14-CN | 18' |
PH718-01-CN | PH718-16-CN | 18' |
PH718-03-CN | PH718-20-CN | 18' |
PH718-05-CN | PH718-40-CN | 18' |
PH426-01-CG1V | PH426-10-CG1V | 26" |
More HIlico models for your references
Vulcanization workshop & Mold tooling
Warehouse & Package
Customers' Visiting
FAQ
Q 1.Which Payment way is workable?
A: Irrevocable L/C, Cash, PayPal, Credit card and T/T money transfers.
B: 30% T/T deposit in advance, 70% balance before shipment after presentation of ready cargo.
C: L/C ( Irrevocable LC at sight: Order amount over USD10,000)
Q 2. What is the normal lead time for product orders?
A: Average lead times for prototype / first article are 1-2 weeks, if tooling is involved, lead time for production tooling is 10 days, average production time after sample approval is 2-3 weeks.
Q 3. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
A2: We have various rubber compounds approved by UL, FDA,, KTW, W270, WRAS, ACS, AS4020, EN681, EN549, ROHS and REACH.
Q 4: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs while keeping material costs in mind.
Q 5: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q 6:Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in case of an order.