We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

In a review recently published in the open-access journal Materials, researchers discussed new developments in the detection of ethylene gas.

Study:  Recent Advances in Ethylene Gas Detection.  Image Credit: CG_dmitriy/Shutterstock.com

The simplest alkene, ethylene, is composed of two double-bonded carbon atoms and four hydrogen atoms. With an ambient air concentration of around 2 parts per billion (ppb), it can readily diffuse in the air.

One of the main precursors for rapid ozone generation in metropolitan settings is ethylene, which is formed in atmospheric chemistry from industrial emissions and vehicle exhausts. Thus, ethylene emissions that are not under control pose a major risk to human health by raising the level of ozone in the troposphere or at ground level. Exogenous ethylene can also metabolically transform into the mutagenic and cancer-causing compound ethylene oxide in the human body.

Endogenous ethylene can result in systemic development in the liver and/or bacterial generation of poisonous ethylene oxide, posing potential health hazards. It is therefore vitally necessary for the horticultural, agricultural, and healthcare industries to design and manufacture very selective, sensitive, and highly stable gas sensors that can conduct the real-time detection of sub-ppm or ppb concentrations of ethylene gas molecules. The concentration of a particular target gas in a complex gas combination can be detected using improved nanostructured sensing materials, according to reports. Although the tiny size, lack of polar chemical functionality, and limited physiochemical reactivity of ethylene gas make its detection at low concentrations difficult, nondestructive methods and chemical reaction techniques are currently being extensively and widely researched to accomplish this goal.

In this study, the authors provided a thorough review of the most advanced ethylene gas detection technologies, ranging from gas chromatographic systems with preconcentrators to Fourier transform infrared technology (FTIR), photoacoustic and surface acoustic wave sensors, photonic crystal fiber-enhanced Raman spectroscopy, printable optically colorimetric sensor arrays, and a wide variety of nanostructured chemiresistive gas sensors including the potentiometric and amperometric-type field effect transistor-, carbon nanotube- and metal oxide-based sensors.

The team proposed a potential roadmap for the advancement of ethylene detection in the near future after a comprehensive discussion of the nanofabrication processes, operating circumstances, and sensing performance of various sensors/technologies.

The researchers examined and discussed recent developments in cutting-edge low-concentration ethylene gas detection technologies, their fabrication methods, operational settings, sensing mechanisms, performances, and corresponding limits of detection. A potential road map for the future development of highly sensitive and selective ethylene gas-sensing technologies was also suggested.

Due to ethylene gas's significance to practically all production chains, detecting and monitoring its level was extremely crucial in the agriculture sector. In order to create a highly sensitive, portable, selective, reliable, cost-effective gas-sensing technology with low power consumption for ethylene gas detection, the great benefits of integrating multidisciplinary technologies should be stressed and given careful consideration.

With a low limit of detection of 2.3 ppb and a detectable concentration of a few tens of ppb, gas chromatography (GC), a mature and extensively used technology, could enable robust and reliable ethylene gas measurement. However, its primary shortcomings were its bulky size, inescapable moisture inference, expensive manufacture, and lengthy and complicated operating procedures, which severely restricted its on-site applicability for ethylene monitoring. The objectives for detecting ethylene gas on site could be greatly achieved by future efforts to transform the general GC for measuring multiple gases into a special tool for targeting the ethylene gas by the development and usage of highly selective, sensitive, and humidity-independent gas sensors.

Due to the possibility for the future ethylene-GC to consume less power and become more portable, efforts to build gas sensors that could operate at room temperature were particularly crucial. Also strongly encouraged was the continued optimization of pre-concentrator-based designs with the goal of streamlining the sampling procedure and shortening the time spent detecting gases. While FTIR and Raman spectroscopy techniques could quickly measure and detect numerous gases, their poor spectral resolution and low signal-to-noise ratio (SNR) restricted their ability to detect ethylene gas below the trace level.

Because water molecules frequently interfere with different ethylene gas-sensing technologies and sensors, such as PAS/QCM devices, GC/FTIR/Raman systems, and organic/inorganic chemiresistive gas sensors, it was crucial to develop and use effective moisture filters in order to achieve the objectives of accurate and on-site ethylene gas detection. High-performance ethylene-sensing technologies would continue to be developed using nanostructured chemiresistive gas sensors as the pioneers. Smaller nanostructured dimensions could improve the sensitivity to gas. Cu(I) complexes and noble and transition metal nanoparticles could concurrently improve sensitivity and selectivity for the detection of ethylene gas. Gas-sensing efficiency might be considerably improved by increment in the specific surface area and/or by making a highly porous microstructure.

In conclusion, this study discussed the most recent state-of-the-art, cutting-edge technologies/sensors for ethylene gas sensing/detection. The authors examined and evaluated a number of important characteristics, including operating conditions, fabrication method, response dynamic and speed, and limit of detection. They mentioned that future work on enhancing the SNR and achieving high spectral resolutions should be taken into consideration. Acoustic and quartz crystal microbalance (QCM) devices, which were examples of sensing technologies based on the piezoelectric effect, exhibited excellent ethylene gas detecting characteristics, including high accuracy, quick and tunable integration times for a desired minimum detection limit (MDL).

The team stated that the investigation of affordable substitutes for laser sources in acoustic configurations could substantially aid in their commercialization. Furthermore, including porous materials in QCM designs could increase their associated sensitivity to ethylene gas. Some metal oxide-based gas sensors could benefit from using secondary energy stimulators, such as bias, visible, ultraviolet (UV), infrared light, and mechanical energy.

More from AZoM: A to Z of Electromagnetic Shielding

Chen, X., Wreyford, R., Nasiri, N., Recent Advances in Ethylene Gas Detection. Materials, 15(17), 5813 (2022).

https://www.mdpi.com/1996-1944/15/17/5813

Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.

Surbhi Jain is a freelance Technical writer based in Delhi, India. She holds a Ph.D. in Physics from the University of Delhi and has participated in several scientific, cultural, and sports events. Her academic background is in Material Science research with a specialization in the development of optical devices and sensors. She has extensive experience in content writing, editing, experimental data analysis, and project management and has published 7 research papers in Scopus-indexed journals and filed 2 Indian patents based on her research work. She is passionate about reading, writing, research, and technology, and enjoys cooking, acting, gardening, and sports.

Please use one of the following formats to cite this article in your essay, paper or report:

Jain, Surbhi. (2022, August 29). Researchers Present Better Ways to Detect Ethylene Gas. AZoM. Retrieved on October 22, 2022 from https://www.azom.com/news.aspx?newsID=59865.

Jain, Surbhi. "Researchers Present Better Ways to Detect Ethylene Gas". AZoM. 22 October 2022. <https://www.azom.com/news.aspx?newsID=59865>.

Jain, Surbhi. "Researchers Present Better Ways to Detect Ethylene Gas". AZoM. https://www.azom.com/news.aspx?newsID=59865. (accessed October 22, 2022).

Jain, Surbhi. 2022. Researchers Present Better Ways to Detect Ethylene Gas. AZoM, viewed 22 October 2022, https://www.azom.com/news.aspx?newsID=59865.

Do you have a review, update or anything you would like to add to this news story?

This interview discusses how ELTRA, as part of Verder Scientific, produces elemental analyzers for the battery component space.

James Stephenson & Selina Ambrose

After connecting at the Advanced Materials Show 2022, AZoM spoke with Selina Ambrose and James Stephenson from Promethean Particles about the mission of the company and the way MOFs are changing the game of carbon capture.

This interview with Francis Quintal Lauzon, Director of Product and Innovation at Clemex Technologies, discusses using artificial intelligence in image analysis. He discusses the challenges involved with automation in microscopy, as well as possibilities for the future of AI.

The BitUVisc is a unique model of viscometer, that can manage highly viscous samples. It is designed to keep the samples warm throughout the entire process.

This product profile from ABB features the TALYS ADP300, a dual-channel wet process analyzer.

ROHAFORM® is a lightweight flame retardant particle foam for industries with stringent fire, smoke and toxicity (FST) level requirements.

This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.

Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.

Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.

AZoM.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022