Model | NZSE20A-01 | NZSE20A-01 | ||
Rated pressure range | 0~-101kPa | 0.000N~-1.000M Pa | ||
Display/Set pressure range | 10~-101kPa | -0.000N~-1.000M Pa | ||
Withstand pressure | 300kPa | 1.5M Pa | ||
Applicable fluid | Air, Non-corrosive gas, Non-flammable gas | |||
Battery | Button battery | |||
Display light | Non | Non | ||
Battery lifespan | 5 years(5 times/day) | |||
Detection of low battery | Yes | |||
Battery replacement | Accept | |||
Display time | 35s | |||
Sampling frequency | 2Hz(2 times/s) | |||
Pressure Unit | Psi,bar,mmHg,Kpa | Psi,bar,kgf/cm2 ,Mpa | ||
Repeatability | +1%F.S. +1 digit/2 | +0.2%F.S. +1 digit | ||
Main screen | 31/2 digits (7 segments) | |||
Display accuracy | ±2% F.S. ±1 digit (Ambient temperature of 25 ±3°C) | |||
Environment | Enclosure | IP65 | ||
Operating temperature range | Operating: −5 to 50°C, Stored: −10 to 60°C (No condensation or freezing) | |||
Operating humidity range | Operating/Stored: 35 to 85%RH (No condensation) | |||
Post size | 01:R1/8",M5;02:NPT1/8",#10-32 UNF;G1/8"(BSPP),M5 04:R1/4",M5;02:NPT1/4",#10-32 UNF;G1/4"(BSPP),M5 | |||
Weight | 40g |
Model | NZSE30A(Vacuum pressure) | NZSE30AF(Compound pressure) | NISE30A(Positive pressure) | |||
Rated pressure range | 0.0~-101.0 KPa | 100.0~100.0 Kpa | 0.100~1.000 MPa | |||
Display/Set pressure range | 10.0~105.0 Kpa | 105.0~105.0 Kpa | 0.105~1.050 MPa | |||
Withstand pressure | 500 Kpa | 500 Kpa | 1.5 MPa | |||
Display/Minimum unit setting | 0.1 Kpa | 0.1 Kpa | 0.001 MPa | |||
Applicable fluid | Air,Non-corrosive gas,Non-flammable gas | |||||
Power supply voltage | 12 to 24 VDC±10%,Ripple(p-p)10%or less(with power supply polarity protection) | |||||
Current consumption | 40 mA or less | |||||
Switch output | NPN or PNP open collector 1 output,NPN or PNP open collector 2 outputs | |||||
Maximum load current | 80 mA | |||||
Maximum applied voltage | 28V(at NPN output) | |||||
Residual voltage | 1 Vor less(with load current of 80 mA) | |||||
Response time | 2.5 ms or less(with anti-chattering function:20,100,500,1000,2000 ms) | |||||
Short circuit protection | Yes | |||||
Repeatability | 10.2%F.S.±1 digit | |||||
Hystere- sis | Hysteresis mode | Variable(0 or above) | ||||
Window comparator mode | ||||||
Analog output | Voltage output | Output voltage(Rated pressure range) | 1 to 5V+2.5%F.S. | 0.6 to 5V±2.5%F.S. | ||
Linearity | ±1%F.S. | |||||
Output impedance | Approx.1 kΩ | |||||
Current output | Output curent(Rated pressure range) | 4 to 20 mA ±2.5%F.S. | 2.4 to 20 mA ±2.5%F.S. | |||
Linearity | ±1%F.S. | |||||
Load impedance | Der wer Maximum load impedance:Power supply voltage 12 V:300 2,Power supply voltage 24 V:600 2 Minimum load impedance:5052 | |||||
Display | 4-digit,7-segment,2-color LCD(Red/Green) | |||||
Display accuracy | ±2%F.S.±1 digit(Ambient temperature of 25±3°C) | |||||
Indicator light | Lights up when switch output is turned ON.OUT1:Green,OUT2:Red | |||||
Environ- ment | Enclosure | IP40 | ||||
Operating temperature range | Operating:0 to 50C,Stored:-10 to 60°C(No freezing or condensation) | |||||
Operating humidity range | Operating/Stored:35 to 85%RH(No condensation) | |||||
Withstand voltage | 1000 VAC for 1 minute between terminals and housing | |||||
Insulation resistance | 50 M2 or more(500 VDC measured via megohmmeter)between terminals and housing | |||||
Temperature characteristics | ±2%F.S.(25°C reference) | |||||
Lead wire with connector | Oilproof heavy-duty vinyl cable,3 cores 03.5,2m 4 cores Conductor area:0.15 mm(AWG26),Insulator O.D.:1.0 mm | |||||
Standards | CE,UL/CSA(E216656),RoHS |
Model | NSE40A(vacuum pressure) | NSE40AF(compound pressure) | NISE40A(positive pressure) | ||
Rated pressure range | 0.0 ~101.3 KPa | 100.0~100.0 KPa | 0.100~1.000 MPa | ||
Display/Set pressure range | 10.0~105.0 KPa | 105.0~105.0 KPa | 0.105~1.050 MPa | ||
Withstand pressure | 500 KPa | 500 KPa | 1.5 MPa | ||
Display/Minimum unit setting | 0.1 Kpa | 0.1 Kpa | 0.001 MPa | ||
Applicable fluid | Air,Non-corrosive gas,Non-flammable gas | ||||
Power supply voltage | 12 to 24 VDC ±10%,Ripple(p-p)10% or less(with power supply polarity protection) | ||||
Current consumption | 45 mA or less | ||||
Switch output | NPN or PNP open collector 1 output or 2 outputs | ||||
Maximum load current | 80 mA | ||||
Maximum applied voltage | 28 V (at NPN output) | ||||
Residual voltage | 1 V or less | ||||
Response time | 2.5 ms(with anti-chattering function:20,100,500,1000,2000 ms) | ||||
Short circuit protection | Yes | ||||
Repeat accuracy | +0.2%F.S.+1 digit | ||||
Hysteresis | Hysteresis mode | Variable(O or above) | |||
Window comparator mode | |||||
Analog output | Voltage output | Output voltage (Rated pressure range) | 1 to 5V+2.5% F.S. | 0.6 to 5V+2.5% F.S. | |
Linearity | ±1% F.S. | ||||
Output impedance | Approx.1 kΩ | ||||
Current output | Output current (Rated pressure range) | 4 to 20 mA ±2.5%F.S. | 2.4 to 20 mA ±2.5% F.S. | ||
Linearity | ±1%F.S. | ||||
Load impedance | Maximum load impedance:300 Ω(Power supply voltage 12 V) 600 Ω(Power supply voltage 24 V) Minimum load impedance:50Ω | ||||
Auto-shift input | Non-voltage input(Reed or Solid state),Low level:0.4 V or less,5 ms or longer input | ||||
Display | 3 1/2-digit,7-segment,2-color LCD(Red/Green) | ||||
Display accuracy | ±2%F.S.+1 digit(Ambient temperature of 25 +3°C) | ||||
Indicator light | Lights up when output is tuned ON.OUT1,OUT2:Orange | ||||
Environment | Enclosure | IP65 | |||
Operating temperature range | Operating:-5 to 50C,Stored:-10 to 60°C(No freezing or condensation) | ||||
Operating humidity range | Operating/Stored:35 to 85% RH(No condensation) | ||||
Withstand voltage | 1000 VAC for 1 minute between terminals and housing | ||||
Insulation resistance | 50 MΩ or more(500 VDC measured via megohmmeter) between terminals and housing | ||||
Temperature characteristics | ±2%F.S.(25C reference) | ||||
Lead wire | Oilproof heavy-duty vinyl cable 5 cores ø3.5, 2 m Conductor area: 0.15 mm2 (AWG26) Insulator O.D.: 0.95 |
Model | NISE80 | NISE80H | NZSE80 | NZSE80F | ||
Rated pressure range | 0.1 ~ 1 MPa | 0.1 ~ 2 MPa | 0 ~ 101KPa | 100 ~- 100KPa | ||
Display/Set pressure range | 0.1 ~ 1.1 MPa | 0.1 ~ 2.2 MPa | 10 ~ 111KPa | 110 ~- 110KPa | ||
Withstand pressure | 2 MPa2 | 4 Mpa | 500 kPa | |||
Wetted parts material | Pressure sensor: Stainless steel 630, Fitting: Stainless steel 304 | |||||
Port siz | Rc1/8 Piping direction: Rear/Bottom | |||||
Power supply voltage | 12 to 24 VDC ±10%,Ripple(p-p)10% or less(with power supply polarity protection) | |||||
Current consumption | 40 mA or less | |||||
Switch output | NPN or PNP open collector 1 output or 2 outputs | |||||
Maximum load current | 80 mA | |||||
Maximum applied voltage | 28 V (at NPN output) | |||||
Residual voltage | 1 V or less | |||||
Response time | 2.5 ms(with anti-chattering function:20,100,500,1000,2000 ms) | |||||
Short circuit protection | Yes | |||||
Repeat accuracy | +0.2%F.S.+1 digit | |||||
Hysteresis | Hysteresis mode | Variable(O or above) | ||||
Window comparator mode | ||||||
Analog output | Voltage output | 0.6 ~ 5 V ±2.5% F.S. | 0.8 ~ 5 V ±2.5% F.S. | 1 ~ 5 V ±2.5% F.S. | ||
0.6 ~ 5.4 V | ||||||
Output impedance | Approx.1 kΩ | |||||
Current output | 2.4 ~ 20 mA ±2.5% F.S. | 3.2 ~ 20 mA ±2.5% F.S. | 4 ~ 20 mA ±2.5%F.S. | |||
2.4 ~ 21.6mA | ||||||
Load impedance | Maximum load impedance:300 Ω(Power supply voltage 12 V) 600 Ω(Power supply voltage 24 V) Minimum load impedance:50Ω | |||||
Display | 3 1/2-digit,7-segment,2-color LCD(Red/Green) | |||||
Display accuracy | ±2%F.S.+1 digit(Ambient temperature of 25 +3°C) | |||||
Indicator light | Lights up when output is tuned ON.OUT1,OUT2:Orange | |||||
Enclosure | IP65 | |||||
Operating temperature range | Operating:-5 to 50C,Stored:-10 to 60°C(No freezing or condensation) | |||||
Operating humidity range | Operating/Stored:35 to 85% RH(No condensation) | |||||
Withstand voltage | 250 VAC for 1 minute between terminals and housing | |||||
Insulation resistance | 2M or more (50 VDC measured via megohmmeter) between terminals and housing | |||||
Temperature characteristics | ±3% F.S. (25°C reference, within operating temperature range) | |||||
Lead wire | Oilproof heavy-duty vinyl cable 5 cores ø3.5, 2 m Conductor area: 0.15 mm2 (AWG26) Insulator O.D.: 0.95 mm |